|
Post by bowtech on Oct 31, 2005 6:15:38 GMT -5
I see alot of people who have put items on thier bows without the understanding of what that item is for.
Therefore,most of the items are incorrect for thier needs
For instance,The term Stabilizer... the vast majority use this item as a sound dampening devise alone.
A stabilizer insert is put in the riser where they need to be in order to balance the bow,not to add shock absorbers. (if you can add a shock absorber at the same time then great!)
The next time you are in a good shop , take a look at diffrent bows of the top shelf names.
Some bows have one insert forward and others will have one insert fore and aft and some bows will have more than two stabilizer inserts.
These inserts are there for the shooter to add counterweights (where needed) to balance that bow to the wants of the shooter.
My personal bow I have set at a 3 second fall to 30 degrees.
Too much or to little weight can have a detrimental effect to the performance of a bow and haphazard attachments are always a negitive.
A better way of reducing bow shock and reverb would be to use attachments (that take the place of exsisting bolts and pins) which are designed to act as absorbers.
|
|
|
Post by ScottC on Oct 31, 2005 6:49:52 GMT -5
Thanks for the info BT.
I use a Doinker A Bomb Multi-Rod Hunter 7". It is both a stabilizer and noise reducer. All the stablizing weight (9oz.) is out at the end.
|
|
|
Post by bowtech on Oct 31, 2005 17:22:51 GMT -5
At 5:00 AM the mind wanders and you start thinking about things that you (me) dont hear much about. Then you start thinking....gee , I wonder how many people even consider_______ ? I have a hollow glass Doinker on the front of the Bow for noise reduction only. The BK2 is so weight forward heavy I need 21OZ. rear to stabilise it to a slow forward rate of fall (none the less...I love my Bow )
|
|
|
Post by ScottC on Nov 1, 2005 6:15:13 GMT -5
We should be saying vibration absorber which reduces noise. ;D
|
|