|
Post by DocHolladay on Dec 16, 2005 5:21:28 GMT -5
I went to the local river yesterday where they put in a frech batch of 3500 rainbow trout last Fri. The water was below the dam when they stocked and after Wednesdays rain it is coming over it like it is supposed to be. It had the trout all messed up. A few people were catching them, but they had to be patient and the wait was terrible. There was a guy there and he had 5 fish and had been there for about 3 hours. Terrible. Usually you can have your limit(7) in about an hour or less. Most use powerbait for trout, but I like using a 1/8oz. black Panther Martin with 2 yellow dots and a gold blade. Cast, count to 3, and give the rod a yank to get the blade turning. Reel it in slowly and you should get a bite on every cast. I also like to fly fish for them, but I wait until the traffic has died down a little so I dont hook anyone in the head. Good luck. What does everybody else use to catch trout?
|
|
|
Post by hunkerite on Mar 8, 2006 8:15:09 GMT -5
Hey Doc,
I use bamboo fly rods with all different kinds of flys. I also use a spinning rod with Rappalas (I can't really spell that wierd word) Can't wait till April 1st because we have a river in Pa and we're going to have a fishing/hunting outing. We will go to a bird dog place in the morning and following we will go fishing. Haven't decided what to use yet but I think I'll try a 8 1/2 foot rod. I usually spin because of all the trees and scrubs and all the stuff that can always snag your line.
Michael
|
|
|
Post by DocHolladay on Mar 8, 2006 8:18:38 GMT -5
I use the fly rod on occasion. I tend to take both and see what the trout want.Most of the time its the Panther Martin, but others its a white wolley bugger.
|
|
|
Post by hoosieroutdoorsman on Mar 8, 2006 16:01:10 GMT -5
I always used a slip bobber,,but always wanted to learn to fly fish but everyone within 3 counties would have to duck,,lol
|
|
|
Post by hunkerite on Mar 17, 2006 10:14:14 GMT -5
Hoosier you should try it. It's so fun when you learn how to. I learned how to fly fish when I was 9 so thats 4 years ago. I went to the local river about35 minutes away and my dad said "Mike you can't use your fly rod here because theres to much foliage. I said okay I'll try a spinning rod. I'm gonna tell you what. That was the hardest thing I ever tried to do because the line would et caught on my finger and I couldnt do it. I was sooooo mad because I thought spin fishing was EASY. Thats how I learned.
Hunk
|
|
|
Post by bassrod2 - TJ on Mar 19, 2006 18:44:49 GMT -5
This was sent to me by one of my website members, thought ya'll might like this!!!!
|
|
|
Post by admin on Mar 19, 2006 18:51:55 GMT -5
yup, you might be a redneck....... ;D
|
|
|
Post by michihunter on Mar 19, 2006 22:20:41 GMT -5
|
|
|
Post by bassrod2 - TJ on Mar 20, 2006 23:10:11 GMT -5
Think about it Ted, here's a guy fishing in a swimming pool LOL
|
|
|
Post by michihunter on Mar 20, 2006 23:31:23 GMT -5
Maybe that's what I'm doing wrong, huh? ;D
|
|
|
Post by bassrod2 - TJ on Mar 21, 2006 15:16:04 GMT -5
never know what you may pull out of a pool my friend.
TJ
|
|
|
Post by michihunter on Mar 21, 2006 15:48:42 GMT -5
Especially around here in Detroit! ;D ;D
|
|
|
Post by bassrod2 - TJ on Mar 25, 2006 16:30:42 GMT -5
Trout fishing tips:
One of the best ways to catch trout is to use bait rigs that are very specific. These rigs will catch fish from 8 inches to 6 pounds. I know because I do it all the time. Best if used for trout, they will catch other types of fish as well. Start out by using 4 to 8 pound test main line of good quality. Then using 4 pound test fluorocarbon leader (I recommend buying the 150 yard filler spool that is sold to go on the reel, but only use it for leaders. That way you will have real tough, invisible leaders for a long time.)
A slip sinker rig is very important to use because the fish won't feel the weight of the sinker when it picks up the bait. This also allows you to feel the fish, or see your line or rod tip move, as soon as it bites. The slip rig is made as follows: Slide the eye of a number 12 or 14 snap swivel onto your main line. Follow that by sliding a small bead (2 to 3 millimeter) onto the line. Next tie the eye of a number 10 or 12 or 14 barrel swivel onto the end of the main line. Use an improved clinch knot.
To the other eye of the same barrel swivel is tied the leader and the hook, again using improved clinch knots (see fishing knots). (If you want a bait holder loop for eggs, just feed the leader back through the hook eye on the backside of the hook to form a loop that is on the opposite side from the point). I recommend a size 16 or 18 treble hook if you are going to use cheese or power bait. Use a size 10 or 8 single hook if you are going to use worms.
Decide how long you want your leader in advance, it needs to be long enough to allow the bait to float above the weeds. Usually 18 to 24 inches will work. Your rig is ready for bait. Here I strongly advise using Berkley Power Bait in the rainbow color on the treble hooks. Make sure to get a little of all three colors on each bait if you can. Cover the hook and check that it floats.
Only power bait floats, therefore you need to use something to float anything else. For Velveeta cheese or a worm use a styrofoam bait floater directly on a hook point. Or you can use a half of a mini-marshmallow that you buy at the super market. Put the half mini in the bait loop. Use a half of a night crawler with the worm threader and cover the entire hook. Cast it out and wait for the bite. Small trout grab this bait and start a tap, tap, tapping on the line. Big trout eat this bait without a whole lot of movement, so watch for the line to move. It might happen real soon, so be ready . Don't set the hook too hard, remember it's a small hook. And make sure your drag is set light.
|
|