|
|
Post by eazy on Jan 24, 2007 15:08:01 GMT -5
Looking for articles on tying in peep sights need help?  EAZY |
|
|
|
Post by hoosieroutdoorsman on Jan 24, 2007 16:33:19 GMT -5
What kind do you have? There are several different styles,,just depends on if you have a tube or a tubeless.
|
|
|
|
Post by eazy on Jan 24, 2007 21:08:02 GMT -5
It's tubeless, wanted to get away from using a tube  |
|
|
|
Post by hoosieroutdoorsman on Jan 25, 2007 4:43:34 GMT -5
The wheely peeps are the easiest to tie in,,just start your serving thread where the strings are separated about 1/2 to 3/4 of an inch above or below the peep and put the thread in between the sparated string and start wrapping really tightly away fron the peep. I usually tie a knot onto 1 on the separated strands of bow string then start wrapping, go out about 3/8 of an inch then start wrapping back over where you have already wrapped, make sure you keep it tite, then when you get back to where you started just do a couple of simple knots and then snip off the loose thread and leave about 1/8 inch sticking out and take a ligher or match and very carefully burn that to a little ball. That should do you,, When it comes to peeps there is now real rhyme or reason on tieing them just make sure you wrap it as tight as you can get it and you should do fine.
|
|
|
|
Post by eazy on Jan 25, 2007 8:48:50 GMT -5
Thanks HOOS. Sounds eazy .
|
|
|
|
Post by eazy on Jan 25, 2007 11:34:55 GMT -5
HOOS> Found a good one at
RackandSpursclub.com. Go to tech aspect
|
|
